Mr. Heater F273791 1/4" Male Pipe Thread x Female P.O.L. with Acme Thread Fitting

Mr. Heater F273791 1/4" Male Pipe Thread x Female P.O.L. with Acme Thread Fitting Review

Mr. Heater F273791 1/4" Male Pipe Thread x Female P.O.L. with Acme Thread Fitting Feature

• Made in USA
• Brass fitting
• One Year Warranty
• QCC-1 & female POL fitting with 1/4" male pipe thread
• One way check valve for no gas flow when disconnected
• 90 day warranty
• Qcc-1 & female pol fitting with 1/4" mpt

1/4"male pipe x female P.O.L. with Acme thread

Nelson Industrial Brass Pipe and Hose Fitting for Male 3/4-Inch NPT to Female Hose, Male and Female 50578

Nelson Industrial Brass Pipe and Hose Fitting for Male 3/4-Inch NPT to Female Hose, Male and Female 50578 Review

Nelson Industrial Brass Pipe and Hose Fitting for Male 3/4-Inch NPT to Female Hose, Male and Female 50578 Feature

• Machined brass construction
• Male and female: 3/4-inch male NH and 3/4-inch female NPS
• Connects to: female garden hose (NH) and 3/4-inch male pipe (NPT)

50578 Size: 0.75" Male Nh and 0.75" Female NPS Features: -Brass pipe and hose fitting. -Availibale in 0.75'' male NH , 0.75'' and 0.75'' male NH. -Machined brass construction. -Male and female. -Connects to: female garden hose, NH, and 3/4'' male pipe, NPT.

1/2" x 1/4" FPT Coupling Brass Pipe Fitting, Pack of 5

1/2" x 1/4" FPT Coupling Brass Pipe Fitting, Pack of 5 Review

Brass pipe fittings are measured by pipe thread. They have NPTF male or female threads a.k.a."Dryseal". Used with brass, copper or iron pipe.

1" 4-way Tee PVC Fitting Connector

1" 4-way Tee PVC Fitting Connector Review

1" 4-way Tee PVC Fitting Connector Feature

• Unique product, not available in stores, exclusively online.
• Made from impact proof, ultra-premium furniture-grade PVC.
• Superior, glossy surface finish.
• UV Stabilized for outdoor color retention.
• Tapered ends for a clean, transitional appearance.

This is not your standard plumbing-grade PVC fitting. FORMUFIT PVC fittings let you create anything with PVC pipe! This tee connects 1" (1.315") PVC pipe at four points, vertically and horizonally. Ideal for center connections along an edge.

Parker 2-2 B2HF-B Brass Barbed Connector To Male Pipe 1/8" Hose Barb x 1/8" Male NPT

Parker 2-2 B2HF-B Brass Barbed Connector To Male Pipe 1/8" Hose Barb x 1/8" Male NPT Review

Since 1924, Parker Hannifin Corporation has served the marketplace with dependable fluid power technology. Much of that expertise originates with Parkers precision-made tube fittings, which were among the first products manufactured by the company. As such, they reflect Parkers ongoing commient to excellence. With more than a half century of experience in product design, engineering and manufacturing, the Tube Fittings Division holds a leadership position few other manufacturers can claim. This leadership is further heightened and enhanced by the technology-sharing only possible in Parkers corporate family. Parker manufactures a broad line of tube fitting and adapters including the Triple-Lok fitting Ferulok fitting (flareless), Intru-lok fitting (brass flareless), EO fitting (metric flareless), EO-2 fitting (metric flareless with elastomeric seal), Seal-Lok fitting (O-ring face seal), Pipe Fittings and Adapters, JIS fittings, Hydraulic Flanges and Adapters, which are offered in a variety of port ends - NPTF, SAE Straight Thread, BSPP, BSPT, ISO and metric. This along with an extensive line of tube fabrication equipment and tube and hose clamps make up the broadest product offering in the industry.

Gas Flex 1/2" Tubing Pipe KIT 33ft with 2 Fittings gasflex

Gas Flex 1/2" Tubing Pipe KIT 33ft with 2 Fittings gasflex Review

Gas Flex 1/2" Tubing Pipe KIT 33ft with 2 Fittings gasflex Feature

• The PE layers protect against corrosion and create a shield so tubing can be embedded in concrete
• The aluminum layer provides stiffness to hold the tubing in the desired shape and fire resistance.
• Together, the layers make up a flexible tubing that stays in place, very low thermal expansion rate.
• Expansion rate (similar to copper and steel).

BRAND NEW 33ft (10mt) kit. 1/2" 1216 Size, FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER. gasFlex is a multi-layered composite tubing consisting of an interior aluminum tubing lined with inner and outer layers of UV resistant polyethylene (PE). It is a durable, reliable tubing that will not corrode or rust. The flexibility of gasFlex tubing results in easy rollouts. The stay-in-place rigid feature of the tubing makes it ideal for: Interior gas piping systems Underground gas piping systems Running gas lines to remote areas in the yard (BBQ -Jacuzzi - Space heater) gaslite systems.

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe Review

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe Feature

• Two piece construction - nut and body
• Use with brass tubing
• Standard fittings use short nuts
• Resists mechanical pullout
• Easy to disassemble and can be reassembled many times with no effect on the seal

Two piece construction - nut and body. Use with brass tubing. Standard fittings use short nuts. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. -65 degree F to +250 degree F temperature range. Primary uses fuel equipment, plumbing, gases, refrigeration and vacuum. 7/16"-20 and 5/8"-18 Thread size.

NIBCO ABS Pipe Fitting, 45 Degree Elbow, Schedule 40, 1-1/2" Spigot x 1-1/2" Hub

NIBCO ABS Pipe Fitting, 45 Degree Elbow, Schedule 40, 1-1/2" Spigot x 1-1/2" Hub Review

NIBCO ABS Pipe Fitting, 45 Degree Elbow, Schedule 40, 1-1/2" Spigot x 1-1/2" Hub Feature

• ABS-DWV (drain, waste and vent) fittings are used for residential and commercial sanitary systems; Do not test or use with compressed air or other gases
• Solvent weld connections; Never use primer with ABS
• Used with ABS DWV pipe
• 1-1/2" Spigot x 1-1/2" Hub
• Service temperature range: -40°F to 180°F

The NIBCO ABS DWV 45-degree street elbow is used in residential and commercial drain, waste and vent systems. The ABS DWV 45-degree street elbow features a spigot x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information.Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

Cash Acme U072A Shark Bite Push-Fittings Straight Female Connector, 1/2-by-1/2-Inch

Cash Acme U072A Shark Bite Push-Fittings Straight Female Connector, 1/2-by-1/2-Inch Review

Cash Acme U072A Shark Bite Push-Fittings Straight Female Connector, 1/2-by-1/2-Inch Feature

• A connection system for Copper, CPVC or PEX pipe , this item cannot ship to CA or VT
• The SharkBite Push-Fittings allow the user to connect pipe in seconds with relative ease
• Instant push-fit connection for increased ease-of use, no soldering, clamps, unions, or glue required
• Fitting certified to 200 PSI and 200-Degree Fahrenheit with proven durability and quality
• Fits copper tubing and CTS CPVC and PEX, connects all three types in any combination

Female iron pipe end. Brass push fitting. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 P.S.I. It is made of 1 piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.

Anderson Metals Brass Hose Fitting, Connector, 5/16" Barb x 3/8" Male Pipe

Anderson Metals Brass Hose Fitting, Connector, 5/16" Barb x 3/8" Male Pipe Review

Anderson Metals Brass Hose Fitting, Connector, 5/16" Barb x 3/8" Male Pipe Feature

• One piece construction
• Use with plastic tubing or rubber hose
• Intended for use with hose clamp or crimp type ferrule
• Barbed edges provide positive connection
• Excellent vibration resistance

Brass hose fitting connector. One piece construction. Use with plastic tubing or rubber hose. 32 degree to 200 degree F temperature range. Intended for use with hose clamp or crimp type ferrule. Barbed edges provide positive connection. Excellent vibration resistance. 5/16" Barb size is hose I.D.

Mr. Heater F276495 Propane Acme Nut X 1/4" Male Pipe Thread For Up to 80,000 BTU Flow Fitting

Mr. Heater F276495 Propane Acme Nut X 1/4" Male Pipe Thread For Up to 80,000 BTU Flow Fitting Review

Mr. Heater F276495 Propane Acme Nut X 1/4" Male Pipe Thread For Up to 80,000 BTU Flow Fitting Feature

• Made in USA
• Up to 80,000 BTU capacity
• One Year Warranty
• Convert old POL connections to new style Acme QCC-1 fittings
• Safety plastic cap pops off if damaged stopping flow of propane
• 90 day warranty
• Convert old p.o.l. connections to new style acme, qcc-1 fittings

Propane Acme male nut x 1/4" male pipe thread for appliances with 80,000 BTU's or less