Genova Products 30158CP 1-Inch PVC Pipe Cap, Slip - 10 Pack

Genova Products 30158CP 1-Inch PVC Pipe Cap, Slip - 10 Pack Review

Genova Products 30158CP 1-Inch PVC Pipe Cap, Slip - 10 Pack Feature

• Used to cap pipe
• Conveniently packaged in quantities of 10
• Ideal for irrigation and underground residential sprinkler systems
• Schedule 40 Pressure Fitting
• Made in the USA

10 Pack, 1", Schedule 40, PVC Slip Cap.

4-Rolls Teflon Tape Thread & Fitting Sealant 1/2" x 520" Roll

4-Rolls Teflon Tape Thread & Fitting Sealant 1/2" x 520" Roll Review

4-Rolls Teflon Tape Thread & Fitting Sealant 1/2" x 520" Roll Feature

• The professional choice for fool-proof thread seals on water pipe, air hose and plumbing fixtures
• More effective, easier/faster/cleaner to apply than thread sealant or glue
• Simply wrap threads and apply fittings - no waiting for drying or curing
• Four rolls of easy-to-work-with 1/2" tape x 520 inches on each roll - over 170 feet of tape total
• This tape is so indispensable (plus it tends to 'disappear') we recommend ordering several sets

Teflon (poly-trafluoroethylene or PTFE) earned it's stripes as a highly effective and reliable thread sealant when it was used during the Manhattan Project to seal pipes carrying radioactive material. More recently, it's been incorporated into the manufacturing process of the waterproof fabric Gore-Tex(TM). And now you can take advantage of it's incredible sealing properties to leak-proof plumbing connections, water pipes, air hose-fittings - just about any threaded connection. Wrap threads tightly to pull Teflon into the threads, overlapping about half the tape-width. Wrap to end of threads but not beyond to avoid causing obstruction. Fittings will tighten and loosen naturally without additional effort; If fitting is removed simply replace tape. An essential time, effort and frustration saver for professionals, do-it-yourselfers and homeowners. (Not for use with natural gas or liquid propane)

Charlotte Pipe & Foundry PVC011020600HA Pvc/dwv Reducing

Charlotte Pipe & Foundry PVC011020600HA Pvc/dwv Reducing Review

Charlotte Pipe & Foundry PVC011020600HA Pvc/dwv Reducing Feature

• CHARLOTTE PVC/DWV REDUCING COUPLING
• Hub x hub
• Schedule 40
• 3" x 1-1/2"

PVC/DWV REDUCING COUPLING Hub x hub Schedule 40 Bulk 3" x 1-1/2"

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Compression x 3/8" Female Pipe

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Compression x 3/8" Female Pipe Review

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Compression x 3/8" Female Pipe Feature

• Three piece construction - nut, sleeve and body with attached insert
• Use with copper, brass, aluminum, or plastic tubing
• Standard fittings use short nuts
• Easy to disassemble no flaring tool required
• Primary uses water, gasoline, oil and vacuum lines

Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 9/16"-24 Thread size.

Nelson Industrial 50571 Double-Male Brass Pipe and Hose Fitting for Connecting to 3/4-Inch Female Hose

Nelson Industrial 50571 Double-Male Brass Pipe and Hose Fitting for Connecting to 3/4-Inch Female Hose Review

Nelson Industrial 50571 Double-Male Brass Pipe and Hose Fitting for Connecting to 3/4-Inch Female Hose Feature

• Double male 3/4-inch male and 3/4-inch male (NPT) that makes connecting a garden hose (NH) to a 3/4-inch female pipe (NPT)

Nelson Sprinkler 50571 Brass Pipe & Hose Fitting Nelson watering equipment accessories make your watering experience easier, more convenient, less costly and more durable. When you choose Nelson accessories, you get products that work seamlessly with Nelson watering equipment. Nelson Sprinkler 50571 Brass Pipe & Hose Fitting Features; Machined brass construction Double male: 3/4" male, and 3/4" male, NPT Connects to: female garden hose, NH, and 3/4" female, NPT

Anvil 8700135851, Malleable Iron Pipe Fitting, Reducer Coupling, 2" x 1-1/2" NPT Female, Galvanized Finish

Anvil 8700135851, Malleable Iron Pipe Fitting, Reducer Coupling, 2" x 1-1/2" NPT Female, Galvanized Finish Review

Anvil 8700135851, Malleable Iron Pipe Fitting, Reducer Coupling, 2" x 1-1/2" NPT Female, Galvanized Finish Feature

• Reducer coupling for connecting two pipes of different sizes going in the same direction
• Female National Pipe Taper (NPT) threads on both ends for connecting two male threaded pipes of different sizes
• Made from malleable iron for tensile strength
• National Pipe Taper (NPT) threads for creating tighter seals than straight threads
• Galvanized finish resists rust in water, air, and steam applications

The Anvil reducer coupling is a class 150 malleable iron pipe fitting with female National Pipe Taper (NPT) threads on both ends to connect two male pipes of different sizes going in the same direction. The coupling has NPT threads for creating tighter seals than straight threads. It is made of malleable iron, which has high tensile strength, and a galvanized finish that resists rust in water, air, and steam applications. This class 150 fitting meets standards ASTM A-197, ASME B 1.20.1, and ASME B 16.3 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure.

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Anvil International provides pipe products and design services. The company, founded in 1850 and headquartered in Portsmouth, NH, meets International Organization for Standardization (ISO) 9001:2000 standards and is certified by the American Petroleum Institute (API). Its fittings meet American Society for Testing and Materials (ASTM) and American Society of Mechanical Engineers (ASME) specifications.

Nelson Industrial Brass Pipe and Hose Fitting for Female 1/2-Inch NPT to Female Hose, Double Male 50570

Nelson Industrial Brass Pipe and Hose Fitting for Female 1/2-Inch NPT to Female Hose, Double Male 50570 Review

Nelson Industrial Brass Pipe and Hose Fitting for Female 1/2-Inch NPT to Female Hose, Double Male 50570 Feature

• Double male 3/4-inch male and 1/2-inch male (NPT) that makes connecting a garden hose (NH) to a 1/2-inch female pipe (NPT)

Nelson Sprinkler 50570 Brass Pipe & Hose Fitting Nelson watering equipment accessories make your watering experience easier, more convenient, less costly and more durable. When you choose Nelson accessories, you get products that work seamlessly with Nelson watering equipment. Nelson Sprinkler 50570 Brass Pipe & Hose Fitting Features; Machined brass construction Double male: 3/4" male, and 1/2" male, NPT Connects to: female garden hose, NH, and 1/2" female, NPT

Anderson Metals Brass Hose Fitting, Connector, 3/8" Barb x 1/2" Female Pipe

Anderson Metals Brass Hose Fitting, Connector, 3/8" Barb x 1/2" Female Pipe Review

Anderson Metals Brass Hose Fitting, Connector, 3/8" Barb x 1/2" Female Pipe Feature

• One piece construction
• Use with plastic tubing or rubber hose
• Intended for use with hose clamp or crimp type ferrule
• Barbed edges provide positive connection
• Excellent vibration resistance

Brass hose fitting connector. One piece construction. Use with plastic tubing or rubber hose. 32 degree to 200 degree F temperature range. Intended for use with hose clamp or crimp type ferrule. Barbed edges provide positive connection. Excellent vibration resistance. 3/8" Barb size is hose I.D.

Mr. Heater F271470 15' Propane Appliance Hose Assembly with 3/8" Male Pipe Thread x 3/8" Female Pipe Thread

Mr. Heater F271470 15' Propane Appliance Hose Assembly with 3/8" Male Pipe Thread x 3/8" Female Pipe Thread Review

Mr. Heater F271470 15' Propane Appliance Hose Assembly with 3/8" Male Pipe Thread x 3/8" Female Pipe Thread Feature

• High pressure hose
• Brass fitting
• One Year Warranty
• Made in USA
• 15 Foot hose
• 90 day warranty

15' propane hose w/ 3/8" male pipe x 3/8" female pipe thread used in addition to the existing hose for more length between propane cylinder and the portable propane appliances such as MH35LP, MH125LP, MH55FAV thru MH400FAVT, MH80CV units

Vermont American 20371 1/8-27 NPT High Carbon Steel Pipe Tap

Vermont American 20371 1/8-27 NPT High Carbon Steel Pipe Tap Review

Vermont American 20371 1/8-27 NPT High Carbon Steel Pipe Tap Feature

• High carbon steel pipe taps are ideal for pipe fittings, cutting internal threads and wherever an extremely tight fit is required.
• Taper taps have 8 to 10 threads chamfered for easy starts in tough materials.
• Four flute design on all taps ensures fast and easy chip clearance.
• Required drill size is permanently etched on the tool for quick and easy reference.

High Carbon Steel Pipe Tap 1/8 in. - 27NPT - Carded

Nelson Industrial Brass Pipe and Hose Fitting with One Swivel for 3/4-Inch Male NPS to Male Hose, Double Female 50576

Nelson Industrial Brass Pipe and Hose Fitting with One Swivel for 3/4-Inch Male NPS to Male Hose, Double Female 50576 Review

Nelson Industrial Brass Pipe and Hose Fitting with One Swivel for 3/4-Inch Male NPS to Male Hose, Double Female 50576 Feature

• Sheet brass (swivel female NH) and machined brass construction
• Double female: swivel 3/4-inch female NH and 3/4-inch female NPS
• Connects to: male garden hose (NH) and 3/4-inch male pipe (NPS)

50576 Size: 0.75" Female Nh And 0.75" Female Nps Features: -Brass pipe and hose fitting. -Availibale in 0.75'' female NH + 0.75'' female NPS and 0.75'' female NH + 0.5'' female NPS. -Sheet brass, swivel female NH, and machined brass construction . -Double female. -Connects to: male garden hose, NH, and 1/2'' male pipe, NPS .

Cash Acme U3016LFA 3/4-Inch SharkBite Lead Free Repair Slip Coupling

Cash Acme U3016LFA 3/4-Inch SharkBite Lead Free Repair Slip Coupling Review

Cash Acme U3016LFA 3/4-Inch SharkBite Lead Free Repair Slip Coupling Feature

• Slip coupling
• For use with copper pipe only
• Slip fittings simplify repair by doing the job that two couplings and extra pipe used to do
• Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe
• The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair

Cash Acme U3016LFA 3/4" Slip Coupling "SHARKBITE" SLIP COUPLING 3/4" The SharkBite Slip Coupling simplifies repair by doing the job that two couplings and extra pipe used to do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair. Features: 3/4" slip coupling. For repairing copper only. Igc 188 and ansi/nsf-61 certified. Meet upc, ipc and cupc requirements for potable and hydronic heating water distribution. This product contains less than 0.25% weighted average lead content on wetted surfaces. Bagged. Cash Acme U3016LFA 3/4" Slip Coupling Features: 3/4" slip coupling. For repairing copper only. Igc 188 and ansi/nsf-61 certified. Meet upc, ipc and cupc requirements for potable and hydronic heating water distribution. This product contains less than 0.25% weighted average lead content on wetted surfaces.

2 PCS 4mm Tee Adapter Push In Pipe Fittings Quick Connector

2 PCS 4mm Tee Adapter Push In Pipe Fittings Quick Connector Review

2 PCS 4mm Tee Adapter Push In Pipe Fittings Quick Connector Feature

• Please notice below size before ordering the item to avoid buying wrong thing
• Made of good quality plastic material and is finished by good work
• Release ring inner diameter on three ends: 4mm x 4mm x 4mm
• Total Size of the Push In Fittings: ~1 9/16" x 1" x 7/16" (L*W*H)
• Package include: 2 x Push In Fittings

The Union Tee Adapter is specially designed for Polyurethane or Nylon tubing; Convenient Tee Push In Fittings provide instant tubing connections; Elliptical release rings facilitates pneumatic installations in confined spaces; Light manual pressure on the elliptical release ring is all that is required to instantly disconnect each tube - No special tools required

Anderson Metals Brass Hose Fitting, 90 Degree Elbow, 3/8" Barb x 1/2" Male Pipe

Anderson Metals Brass Hose Fitting, 90 Degree Elbow, 3/8" Barb x 1/2" Male Pipe Review

Anderson Metals Brass Hose Fitting, 90 Degree Elbow, 3/8" Barb x 1/2" Male Pipe Feature

• One piece construction
• Use with plastic tubing or rubber hose
• Intended for use with hose clamp or crimp type ferrule
• Barbed edges provide positive connection
• Excellent vibration resistance

One piece construction. Use with plastic tubing or rubber hose. 32 degree to 200 degree F temperature range. Intended for use with hose clamp or crimp type ferrule. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.